Subject: Digiscoping with Lumix G1 plus Nikon 35mm f1.8 DX lens [Print This Page] Author: cwchan Time: 29/05/2010 21:39 Subject: Digiscoping with Lumix G1 plus Nikon 35mm f1.8 DX lens
The setup is as follows
My old scope+30X eyepiece+DCA+Nikon 35mm f1.8 DX lens+Nikon-m43 mount+Lumix G1 body
There is no autofocus anymore. However, with the aid of spot enlarging device provided in the view finder, manual focus is basicaly no problem.
All the shots below were uncropped in order to show the vignetting effect, if any. It is hard to see.
The focal length of the whole system is 2100mm. Vibration is always the problem for this ultra-tele lens. As always true, a stable support and the use of cable release (the electic one in G1) are the must for achieving a sharp image. In addition, don't forget to hold your breath and wait for the wind stop, if any, before pressing your shutter.
Author: fneil Time: 17/06/2010 19:35
Wing,
I like the look of this lens. I don't have it yet as I have the 50/1.8 but I find it a bit long for most digiscoping on the G1. The 35 mm is a better length. I will consider getting one.
Thanks, Neil. Author: cwchan Time: 18/06/2010 18:17
Neil,
You need a Nikon(G)--m43 adapter since the 35mm f1.8 is a G-lens.
Wing Author: boomhand Time: 22/04/2011 00:31
ching,
我本身用35mm/1.8G + nikon d7000
請問裝什麼adoptor到swaroski stm 80 HD + 30X?
是否有暗角?
請賜教!!Author: dick Time: 22/04/2011 06:26
Quote:
Original posted by boomhand at 22/04/2011 00:31
ching,
我本身用35mm/1.8G + nikon d7000
請問裝什麼adoptor到swaroski stm 80 HD + 30X?
是否有暗角?
請賜教!!
Yes, Dick's recommendation is the most simple way, in fact, I use the same method of using this lens in my Nikon DSLR and G-1 (with adaptor).
However, the new DCA (DCA zoom, currently in the market) seems to be designed for its zoom eyepiece. When it is used on 30X eyepiece, the female adapter tube of this DCA set is not long enough to provide a secure fitting. I think Dick has this experience. Author: boomhand Time: 24/04/2011 22:41