HKBWS Forum 香港觀鳥會討論區 - Powered by Discuz! Board

Subject: Nikon 1 DIY 機械快門線 [Print This Page]

Author: TonyTang Time: 24/01/2012 19:33 Subject: Nikon 1 DIY 機械快門線

Nikon 1 相機本身有紅外線電子快門線, 但使用上有很多限制, 如不能半按快門, 沒有連拍等等, 大大減弱了可用性, 如果用於鳥攝, 反應速度慢更是至命傷, 解決之道, 又回到一般 digiscoper 對 DC 的老路 -- DIY 機械快門線.

這裡分享的是一個簡單方法, 務求以最少的工序完成, 懶人如我最為合宜.

材料:
機械快門線一條
電話用腳架配接器一個(香港鴨尞街 HK$25 可買)

工序:
在腳架配接器頂鑽小孔, 把機械快門線直接收上去就完成了, 太簡單了罷?

裝上 V1 後的樣子 ...

以後唔怕手震了.

Author: lwingkay Time: 24/01/2012 22:17

Ingenious.
Pete

Author: lmike Time: 24/01/2012 22:45

........

Author: wcaptain Time: 26/01/2012 10:01

Is it ok for Sony NEX? Worthwhile to try.

Author: 9Wi Time: 26/01/2012 16:38

Good.

BTW, Would anybody like to share the experience in digiscoping with NEX camera? Many thanks.

Author: lexusjohn Time: 26/01/2012 17:32

Author: TonyTang Time: 26/01/2012 19:17

Quote:

原帖由 wcaptain 於 26/01/2012 10:01 發表
Is it ok for Sony NEX? Worthwhile to try.

Sure. Don't be misled by my caption. Any camera should be alright if it is not much bigger than this big Nikon DC. The only problem should be the blocking of zoom button beyond the shutter release button, if any.

Author: lhw Time: 3/02/2012 19:30

hi,wherr is the shop near?thanks

Author: TonyTang Time: 5/02/2012 23:22

Quote:

原帖由 lhw 於 3/02/2012 19:30 發表
hi,wherr is the shop near?thanks

螢記對面攝影器材

Author: lwingkay Time: 6/02/2012 00:11

Dear Tony,
Can you show us how you link your 10-30mm with the eyepiece of your fieldscope for digiscoping purposes?
Pete

Author: wengchun Time: 27/04/2013 20:33

Hi. I would like to know to to fit the lens to the scope eyepiece too.

Author: slauhk Time: 28/10/2013 14:45

多謝師兄，我剛剛都需要找方法解決問題。

Welcome to HKBWS Forum 香港觀鳥會討論區 (http://hkbws.org.hk/BBS/)